Challenge MS-10 Multiple Spindle Drill

Maximum Number of Drill Heads 10 Heads

Drill Sizes Available** (2" capacity) 1/8" to 1/2" / 3 to 13 mm
Drill Sizes Available (2-1/2" capacity) 1/4" to 1/2" / 6 to 13 mm
Center to Center Distance Maximum 21" / 53 cm
Center to Center Distance Minimum*** 1-1/4" / 3.2 cm
Minimum Distance Between Holes w/ Adj. Stops 3/8" / 9.5 cm
Minimum Distance Between Holes w/ Fixed Gauges 1/4" / 6 mm
Maximum Drilling Capacity 2-1/2" / 6.35 cm
Strokes per Minute (adjustable) 18 to 26
Backgauge Adjustment 0 to 9" / 0 to 23 cm
Vertical Adjustment of Individual Heads 1/4" / 6 mm

DIMENSIONS

Table Size 24" x 36" / 61 x 91 cm
Table Height 38" / 96.5 cm
Overall Height 60" / 152 cm
Floor Space Needed 35" x 40" / 89 x 102 cm
Net Weight (approximate) 1350 lbs / 675 kg
Shipping Weight (approximate) 1660 lbs / 830 kg

ELECTRICAL

Standard -
3 Phase, 60 Hz, AC.  Pump: 3/4 HP.  Spindle Motor: 3 HP.
208 Volts, 14 Amps (service size 20 Amps) or
230 Volts, 12.8 Amps (service size 20 Amps) or
460 Volts, 6.6 Amps (service size 15 Amps)

Optional -
1 Phase, 60 Hz, AC.  Pump: 3/4 HP.  Spindle Motor: 3 HP
208 Volts, 26.5 Amps (service size 40 Amps) or
230 Volts, 24.2 Amps (service size 40 Amps)

** Special large hole drilling (up to 1-3/4" in diameter)is possible with conversion kit.
*** Three hole drilling heads are available for drilling 3 holesin 1" centers.